Below is a list of articles pertaining to Light Metals at Hatch which have been published in journals and/or conference proceedings.
A Zero Waste Framework for a New Minerals Industrial Complex
Authors: J. Wehrli, M. Campbell, L. Fergusson
The International Committee for Study of Bauxite, Alumina and Aluminum (ICSOBA), 18 October 2011
Abstract
AP60 - The Realization of the next generation of commercial AP technology
Authors: F. Charmier, P. Ficara, A. Noel
Conference of Metallurgist (COM) 2011, October 4th 2011
Abstract
Impact of Amperage Creep on Potroom Busbars and Electrical Insulation: Thermal-Electrical Aspects
Authors: AF. Schneider, D. Richard, O. Charette
TMS 2011, 140th Annual Meeting & Exhibition of the Minerals, Metals & Materials Society, San Diego, CA, February 27th – March 3rd, 2011
Abstract
Magnesium Metal Production in Canada
Authors: D. Creber, B. Davis, S. Kashani- Nejad
COM Commemorative Book, Chapter D - Light Metals (Aluminum & Magnesium), October 2011
Abstract
Application of Nanofiltration Technology to Improve Sea Water Neutralization of Bayer Process Residue
Authors: H. Adamson, L. Fergusson, M. Mullet, K. Taylor, J. Wehrli
The Mineral, Metals and Materials Society's 140th Annual Meeting and Exhibition (TMS 2011), San Diego, CA, March 1, 2011
Abstract
How Technical Support Partnerships Add Value to Smelting Operations
Authors: T. Ireland-Hay, S. Broek, D. Richard, J. Petrolito
10th Australasian Aluminum Smelting and Technology Conference (AASTC), 14th October 2011
Abstract
An Integrated Approach for the Brownfield Debottlenecking of Primary Aluminum Smelters
Authors: D. Richard, AF. Schneider, J. Petrolito, T. Ireland-Hay, S. Broek
10th Australasian Aluminum Smelting and Technology Conference (AASTC),10th October 2011
Abstract
Recent Improvements in Ventilation and Emission Reduction in Primary Aluminum Smelters
Author: S. Broek
10th Australasian Aluminum Smelting and Technology Conference (AASTC), 14th October 2011
Abstract
An integrated Implementation of Management Information and Process Control Systems for Optimizing Greenfield Aluminum Smelter Project
Author: H. Tremblay
Middle East Annual Aluminum Conference – Dubai 2011 (MEED) March 16th , 2011
Considerations Regarding High Draft Ventilation as an Air Emission Reduction Tool
Authors: S. Broek, Dr. N. Dando, S. Lindsay, A. Moras,
2011 TMS, March 2, 2011
Abstract
On the logistics of rebuilding an anode baking furnace while maintaining operation
Authors:
R. Coulombe, D. Machado, J. Ferguson, D. Carle
2010 TMS Conference in Seattle, USA, February 2010
Abstract
Magnesium Chloride Dehydration Using the Fluidized Bed Technology
Authors:
K. Adham, C. Lee, K. O'Keefe
Conference of Metallurgist: COM 2010, Vancouver, Canada, October 5, 2010
Abstract
Busbar Circuit Design and Installation for Boosting Already Boosted Pots
Authors:
D. Champagne, D. P. Ziegler, A. Felipe Schneider, D. Richard
The Materials, Minerals & Metals Society Annual Meeting, Light Metals Division (TMS2010), Seattle, USA, February 17, 2010
Abstract
Aurukun Bauxite - A High Reactive Silica, Monohydrate Bauxite and Advantages and Disadvantages for Process Design and Operation
Authors:
J. Theodor Wehrli, Y. Jiang
The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA), Zhengzhou, China, 25-27 November 2010
Abstract
Casthouse Design for the Production of Air-Cooled, Low-Profile Aluminium Sows
Authors:
T. Plikas, T. Cesta, L. Gunnewiek, M. Trovant, R. Santiago, J. Vanasse
The Materials, Minerals & Metals Society Annual Meeting 2010, Seattle, USA, February 14 - 18, 2010
Abstract
Upflow Design versus Downflow Design for Digestion Flash Train
Author:
Q.K. Tran
International Committee for Study of Bauxite, Alumina & Aluminium, Zhengzhou, China, November 2010
Abstract
Color Quality Improvement of Hydrate at ETI
Authors:
A. Yiğit, B. Çelikel, S. Ertuğrul, G. Kürşat Demir Meral Baygül, C. E Suarez, D.R. Chinloy, D.A. Ingram
International Committee for Study of Bauxite, Alumina & Aluminium, Zhengzhou, China, November 2010
Abstract
Energy Efficiency of Casthouse Furnaces
Authors:
R. Voyer, F. Carron
TMS 2010 139th Annual Meeting & Exhibition, Feb 14, 2010
Abstract
The Design Of Pressure Safety Systems in the Alumina Industry
Author: B. Haneman
The Minerals Society, San Francisco, February 2009
Abstract
The Origin and Abatement of SO2 Emissions from Aluminium Smelters
Authors: S. Broek, B. Rogers
The Minerals Society, San Francisco, February 17, 2009
Abstract
Operations Support in the Alumina Industry - A Valuable Partnership
Author: J. Berzansky
The Minerals Society, San Francisco, February 17, 2009
Abstract
Process Safety Management Application in Alumina Refineries
Author: C. E. Suarez
The Minerals Society - Alumina Refinery Fundamentals and Practices, San Francisco, February 15, 2009
Heat Transfer Considerations for DC Busbars Sizing
Authors: A. F. Schneider, T. Plikas, D. Richard, L. Gunnewiek
The Minerals Society, San Francisco, February 19, 2009
Abstract
Estimating the Production Capabilities of Casthouse Equipment Configuration Options
Author: P. W. Baker
Australasian Aluminium Casthouse Conference, September 2009. Published under Materials Science Forum Vol. 630 (2010) pp 165-171
Abstract
Challenges in Stub Hole Optimisation of Cast Iron Rodded Anodes
Authors: D. Richard, P. Goulet (Laval University), O. Trempe (Laval University), M. Dupuis (GeniSIM) and M. Fafard (Laval University)
The Minerals Society, San Francisco, February 18, 2009
Abstract
Can Primary Aluminium Producers Meet Climate Change Challenges in a Pragmatic Manner?
Authors: S. Broek, A. Kazakova
24th Aluminium Conference by Metal Bulletin, September 15, 2009
The Changing Face of Project Evaluation – Meeting the demands of changing Projects, Project Owners and Evaluation Criteria
Author: R. Kelly
Project Evaluation 2009 Australasian Institute of Mining and Metallurgy (AusIMM), April 22, 2009
Abstract
Using CFD to Reduce Commissioning Time for Electrostatic Precipitators
Authors: R.Haywood, G.J. Brown (Alcoa World Aluminum), L.J. Irons, M. Stark
Fifth International Conference on CFD in the Process IndustriesCSIRO, Melbourne, Australia 13-15 December 2006
Abstract
Dynamic Dislocation -Defect Analysis and SAXS Study of Nanovoid Formation in Aluminum Alloys
Authors: L. Westfall, B.J. Diak, M.A. Singh, and S. Saimoto
Journal of Engineering Materials and Technology 2008
Abstract
Multiphase Modeling in Metallurgical Plant Design
Author: L. Oshinowo
Applications of three-phase flashing flow in design and study alumina digestion flash trains
Author: Q.K. Tran
Energy Recovery in the Metal Chloride Pyrohydrolysers
Authors: K. Adhman, C. Lee
Chloride Metallurgy 2002, International Conference on the Practice and Theory of Chloride/Metal Interaction, Montréal, Canada
Abstract
Pyrohydrolysis of a Calcium and Magnesium Bearing FeCI2 Leach Liquor
Authors: M-C. Patoine, A. De Mori, K. Borowiec
Abstract
Momentum Change in Digestion Relief Headers
Authors: Q. Tran, H. Tran
International Alumina Qualtiy Workshop
New Smelter Capacity Required! Examining the Options and Costs from Debottlenecking to Greenfield Investment
Author: G W Morrey
Abstract
A Replacement for SF6: The MagShield System
Authors: Dr. V. Revankar, P. Baker, Dr. A. Schultz, H. Brandt
IMA –2000 Annual World Magnesium Conference, May 23, 2000
Abstract
Issues in Magnesium DC Casting
Author: P. Baker
Symposium on Light Metals 1997 Metaux Legers as held at the 36th Annual Conference of Metallurgists of CIM; Sudbury, Canada; August 17 - 20, 1997
Abstract
Cover Gas Protection for Magnesium - New Perspectives
Authors: S. Cashion, P. Hayes, N. Ricketts, R. Western, P. Baker
Evaluating Investment Opportunities - Making the Right Decisions
Authors: D.Clarry, W. Berends
Metal Bulletin's 13th International Aluminium Conference, Istanbul Turkey, September 6 - 8, 1998
Abstract
Two-Phase Flashing Flow Slip Model for Slurry Flow Applications
Author: Q.K. Tran
CHEMECA 2000, Perth, Australia, July 2000
Abstract
Transient Analyses in Relief Systems
Authors: D. De Boer, B. Haneman and Q.K. Tran
CHEMECA 2000, Perth, Australia, July 2000
Abstract
Indirect Heat Exchangers for Lateritic Slurries
Authors: Q.K. Tran , P. Bartsch and A. Maggs
Applications of Two-Phase Flashing Model in Slurry Flow
Authors: Q.K. Tran and D. De Boer
ALTA 2000 Nickel/Cobalt-6, Perth, Australia, 15 - 18 May 2000
Abstracts
Sizing of Relief Valves for Two-Phase Flow in the Bayer Process
Authors: Q.K. Tran and M. Reynolds
Study On Filtered Mud Conveying at an Alumina Refinery Determining the Fluid Characteristics of Red Mud Pastes and Cakes
Authors: Q.K. Tran and L. Glumac
Intensive Sidewall Cooling in Hall Heroult Cells
Authors: R.Haywood, J. Sarvinis, A. Monaghan, P.W. Baker
Light Metals 2003: International Symposium on Light Metals, 42nd Annual Conference of Metallurgists of CIM; 2003
Abstract
Capacity Creep Considerations for a Typical Carbon Plant
Author: D.Glover
Light Metals 2005, 134th TMS Annual Meeting, San Francisco, USA; February, 2005
Abstract
Plant Optimisation
Authors: J. Kwak, J. Leahy and K. Pery
